In this scenario, you set up your own access point. Please note, in this case, a number of devices you can connect to the AP is really limited. VRELs 1, 2, 3 and 4 are physically located together, while VREL 6 and VREL 7 are in two remote locations, thus you may not be able to reach hosted AP.

Undergraduate / Bachelor / Engineering Students

You need to know how to handle 4×20 characters LCD screen. In case of doubt re-work on scenarios B1 and B2.
Warning: In no case should you give your AP the internal.IOT SSID name! You will mess up the laboratory environment and block other users from accessing network infrastructure. We consider this behaviour as hacking and it will be penalized under legal jurisdiction!

To fully experience this scenario, you need to book another node (one of 1,2,3 or 4), to let the other node act as your networking client. You can use scenario U1 for this purpose but mind to update network SSID and passphrase in your code, to let it connect to your server.

In this scenario, you will set up an access point and present on the LCD screen number of clients connected

On the

Write starting conditions, i.e. what to do at the beginning, what to pay attention before beginning, how the mechanical part should look like, etc.

Write some extra information if i.e. some steps are optional otherwise cancel this paragraph (but do not remove header).

Describe activities done in Step 1.

…

Describe activities done in Step n.

Provide some result validation methods, for self assesment.

This section is to be extended as new questions appear.
When using the printed version of this manual please refer to the latest online version of this document to obtain the valid and up-to-date list of the FAQ. Provide some FAQs in the following form:
Question?: Answer.