Crazy USB mouse

Requirements: [HW] Controller

Mouse cursor moving round

ARM-CAN USB mouse demo project. Software is based on TI StellarisWare USB library. When attaching the ARM-CAN controller board to the PC, it acts as a standard USB HID mouse. Fixed-point sine calculation functions are used to move cursor around. Push-button on the controller board acts as a left button.

//*****************************************************************************
//
// Crazy USB mouse.
//
// Copyright (c) 2009 TUT Department of Mechatronics
//
//*****************************************************************************
 
#include <inc/hw_ints.h>
#include <inc/hw_types.h>
#include <driverlib/sysctl.h>
#include <driverlib/interrupt.h>
#include <driverlib/usb.h>
#include <usblib/usblib.h>
#include <usblib/usbhid.h>
#include <usblib/usb-ids.h>
#include <usblib/device/usbdevice.h>
#include <usblib/device/usbdhid.h>
#include <usblib/device/usbdhidmouse.h>
#include <drivers/general.h>
#include <utils/sine.h>
#include "usb_mouse_structs.h"
 
//*****************************************************************************
//
// Global variables.
//
//*****************************************************************************
volatile tBoolean g_bConnected;
volatile tBoolean g_bCanSend;
 
//*****************************************************************************
//
// Mouse handler.
//
//*****************************************************************************
unsigned long MouseHandler(void *pvCBData, unsigned long ulEvent,
                           unsigned long ulMsgData, void *pvMsgData)
{
    switch (ulEvent)
    {
        //
        // The USB host has connected to and configured the device.
        //
        case USB_EVENT_CONNECTED:
        {            
            g_bConnected = true;
			g_bCanSend = true;
            break;
        }
 
        //
        // The USB host has disconnected from the device.
        //
        case USB_EVENT_DISCONNECTED:
        {         
            g_bConnected = false;         
			g_bCanSend = false;
            break;
        }
 
        //
        // A report was sent to the host.
        //
        case USB_EVENT_TX_COMPLETE:
        {            
			g_bCanSend = true;
            break;
        }
 
    }
    return(0);
}
 
//*****************************************************************************
//
// Main function.
//
//*****************************************************************************
int main(void)
{	
	unsigned long ulAngle = 0;
	char cDeltaX = 0, cDeltaY = 0;		
 
	//
	// Set the clocking to run from the PLL at 50MHz
	//
	SysCtlClockSet(SYSCTL_SYSDIV_4 | SYSCTL_USE_PLL | SYSCTL_OSC_MAIN |
					SYSCTL_XTAL_8MHZ);
 
	//
	// Drivers configuring.
	//
	DeviceConfigure();
 
	//
	// Pass the USB library our device information, initialize the USB
	// controller and connect the device to the bus.
	//
	USBDHIDMouseInit(0, (tUSBDHIDMouseDevice *)&g_sMouseDevice);
 
	//
	// Enable processor interrupts.
	//
	IntMasterEnable();	
 
	//
	// Loop forever.
	//
	while (true)
	{			
		//
		// Device connected and ready ?
		//
		if (g_bConnected && g_bCanSend)
		{			
			//
			// Rotate by 1 / 256 of full circle.
			//
			ulAngle += 0x1000000;
 
			//
			// Calculate X and Y movement.
			// Use sine function with fixed point numbers.
			//
			cDeltaX = sine(ulAngle) >> 14;
			cDeltaY = sine(ulAngle - 0x40000000) >> 14;
 
			//
			// Keep a small break.
			//
			DelayMS(5);
 
			//
			// Update mouse state.
			//			
			USBDHIDMouseStateChange((void *)&g_sMouseDevice,
				cDeltaX, cDeltaY,
				(ButtonIsPressed() ? MOUSE_REPORT_BUTTON_1 : 0));
		}
	}
}

//*****************************************************************************
//
// usb_mouse_structs.h - Data structures defining the mouse USB device.
//
//*****************************************************************************
 
#ifndef _USB_MOUSE_STRUCTS_H_
#define _USB_MOUSE_STRUCTS_H_
//*****************************************************************************
//
// Application event handlers.
//
//*****************************************************************************
extern unsigned long MouseHandler(void *pvCBData,
                                  unsigned long ulEvent,
                                  unsigned long ulMsgData,
                                  void *pvMsgData);
 
extern const tUSBDHIDMouseDevice g_sMouseDevice;
 
#endif

//*****************************************************************************
//
// usb_mouse_structs.c - Data structures defining the USB mouse device.
//
//*****************************************************************************
 
#include "inc/hw_types.h"
#include "driverlib/usb.h"
#include "usblib/usblib.h"
#include "usblib/usbhid.h"
#include "usblib/usb-ids.h"
#include "usblib/device/usbdevice.h"
#include "usblib/device/usbdhid.h"
#include "usblib/device/usbdhidmouse.h"
#include "usb_mouse_structs.h"
 
//*****************************************************************************
//
// The languages supported by this device.
//
//*****************************************************************************
const unsigned char g_pLangDescriptor[] =
{
    4,
    USB_DTYPE_STRING,
    USBShort(USB_LANG_EN_US)
};
 
//*****************************************************************************
//
// The manufacturer string.
//
//*****************************************************************************
const unsigned char g_pManufacturerString[] =
{
    (30 + 1) * 2,
    USB_DTYPE_STRING,
    'T', 0, 'U', 0, 'T', 0, ' ', 0, 'D', 0, 'e', 0, 'p', 0, 'a', 0,
	'r', 0, 't', 0, 'm', 0, 'e', 0, 'n', 0, 't', 0, ' ', 0, 'o', 0,
	'f', 0, ' ', 0, 'm', 0, 'e', 0, 'c', 0, 'h', 0, 'a', 0, 't', 0,
	'r', 0, 'o', 0, 'n', 0, 'i', 0, 'c', 0, 's', 0
};
 
//*****************************************************************************
//
// The product string.
//
//*****************************************************************************
const unsigned char g_pProductString[] =
{
    (11 + 1) * 2,
    USB_DTYPE_STRING,
    'C', 0, 'r', 0, 'a', 0, 'z', 0, 'y', 0, ' ', 0, 'M', 0, 'o', 0, 'u', 0,
    's', 0, 'e', 0
};
 
//*****************************************************************************
//
// The serial number string.
//
//*****************************************************************************
const unsigned char g_pSerialNumberString[] =
{
    (8 + 1) * 2,
    USB_DTYPE_STRING,
    'F', 0, 'F', 0, 'F', 0, 'F', 0, 'F', 0, 'F', 0, 'F', 0, 'F', 0
};
 
//*****************************************************************************
//
// The interface description string.
//
//*****************************************************************************
const unsigned char g_pHIDInterfaceString[] =
{
    (19 + 1) * 2,
    USB_DTYPE_STRING,
    'H', 0, 'I', 0, 'D', 0, ' ', 0, 'M', 0, 'o', 0, 'u', 0, 's', 0,
    'e', 0, ' ', 0, 'I', 0, 'n', 0, 't', 0, 'e', 0, 'r', 0, 'f', 0,
    'a', 0, 'c', 0, 'e', 0
};
 
//*****************************************************************************
//
// The configuration description string.
//
//*****************************************************************************
const unsigned char g_pConfigString[] =
{
    (23 + 1) * 2,
    USB_DTYPE_STRING,
    'H', 0, 'I', 0, 'D', 0, ' ', 0, 'M', 0, 'o', 0, 'u', 0, 's', 0,
    'e', 0, ' ', 0, 'C', 0, 'o', 0, 'n', 0, 'f', 0, 'i', 0, 'g', 0,
    'u', 0, 'r', 0, 'a', 0, 't', 0, 'i', 0, 'o', 0, 'n', 0
};
 
//*****************************************************************************
//
// The descriptor string table.
//
//*****************************************************************************
const unsigned char * const g_pStringDescriptors[] =
{
    g_pLangDescriptor,
    g_pManufacturerString,
    g_pProductString,
    g_pSerialNumberString,
    g_pHIDInterfaceString,
    g_pConfigString
};
 
#define NUM_STRING_DESCRIPTORS (sizeof(g_pStringDescriptors) /                \
                                sizeof(unsigned char *))
 
//*****************************************************************************
//
// The HID mouse device initialization and customization structures.
//
//*****************************************************************************
tHIDMouseInstance g_sMouseInstance;
 
const tUSBDHIDMouseDevice g_sMouseDevice =
{
    USB_VID_LUMINARY,
    USB_PID_MOUSE,
    500,
    USB_CONF_ATTR_SELF_PWR,
    MouseHandler,
    (void *)&g_sMouseDevice,
    g_pStringDescriptors,
    NUM_STRING_DESCRIPTORS,
    &g_sMouseInstance
};