Differences

This shows you the differences between two versions of the page.

--- et:examples:digi:7seg [2009/05/18 14:57] – raivo.sell
+++ et:examples:digi:7seg [2009/11/04 13:16] (current) – eemaldatud mikk.leini
@@ Line 1: / Line 1: @@
-====== 7-segmendise numberindikaatori kasutamine ======
-{{:examples:7-seg.jpg|}}
--segment LED numberindikaator on Digitaalplaadil ühendatud läbi draiveri A6275 ({{:examples:datasheets:a6275_led_driver.pdf|datasheet}}).
-Draiver on ühendatud kontrolleri portidesse: PORTC ja PORTG vastavalt joonisele. latch PORTG2, Serial PORTC6 ja clock PORTC7.
-{{:examples:7seg_schematics.jpg?500}}
-Järgnevalt on toodud 7 segmendilise numbri indikaatori kasutamise näide. Selleks on vaja ATmega128 põhiplaadi külge lisada Studyboard. Näites kasutatakse indikaatorit läbi selleks loodud funktsioonide mida on võimalik kiirelt ka teistesse projektidesse kopeerida. Kasutusel on viikude operatsioonid (vaata [[et:examples:digi:pin|lähemalt]]).
-<code c>
-//
-// Simple up/down counting single 7-segment digit example.
-//
-// Raivo Sell, Erki Leitaru, Mikk Leini
-//
-// 2009
-//
-// Include avrlibc
-#include <avr/io.h>
-#include <util/delay.h>
-// Include common library
-#include "pin.h"
-// Configure pins
-#define SEGMENT_DISPLAY_LATCH      PORTPIN(G, 2)
-#define SEGMENT_DISPLAY_DATA_OUT   PORTPIN(C, 6)
-#define SEGMENT_DISPLAY_CLOCK      PORTPIN(C, 7)
-//
-// 7 segment display initialization
-//
-void segment_display_init(void)
-{
-	// Set latch, data out and clock pins as output
-	pin_setup_output(SEGMENT_DISPLAY_LATCH);
-	pin_setup_output(SEGMENT_DISPLAY_DATA_OUT);
-	pin_setup_output(SEGMENT_DISPLAY_CLOCK);
-}
-//
-// Digit writing to 7 segment display
-//
-void segment_display_write(unsigned char digit)
-{
-	unsigned char map;
-	// Decimal to segment map
-	switch (digit)
-	{
-		case 0 : map = 0b00111111; break; // Every bit corresponds to one segment
-		case 1 : map = 0b00000110; break; // "1"
-		case 2 : map = 0b01011011; break; // "2"
-		case 3 : map = 0b01001111; break; // "3" and so on
-		case 4 : map = 0b01100110; break;
-		case 5 : map = 0b01101101; break;
-		case 6 : map = 0b01111100; break;
-		case 7 : map = 0b00000111; break;
-		case 8 : map = 0b01111111; break;
-		case 9 : map = 0b01100111; break;
-		default: map = 0b01111001;        // E like Error
-	}
-	// Latch low
-	pin_clear(SEGMENT_DISPLAY_LATCH);
-	// Send every bit in the byte. MSB (most significant bit) first.
-	for (signed char i = 7; i >= 0; i--)
-	{
-		// If bit is set, sets the data out pin, otherwise not
-		pin_set_to(SEGMENT_DISPLAY_DATA_OUT, IS_BIT_SET(map, i));
-		// Clock high for certain period
-		pin_set(SEGMENT_DISPLAY_CLOCK)
-		_delay_us(1);
-		// Clock low for certain period
-		pin_clear(SEGMENT_DISPLAY_CLOCK)
-		_delay_us(1);
-	}
-	// Latch high
-	pin_set(SEGMENT_DISPLAY_LATCH);
-}
-//
-// Program entrance function
-//
-int main(void)
-{
-	unsigned char digit = 0; // Digit to display on segment
-	signed char delta = 1;   // Digit modifying value
-	//digit = int (void) { return 2; };
-	// 7 segment display initialization
-	segment_display_init();
- 	// Endless loop
-	while (1)
-	{
-		// Write digit
-		segment_display_write(digit);
-		// Increase digit value by delta (which can be negative also)
-		digit += delta;
-		// Swap counting direction on 0 and 9
-		if (digit == 0) delta = +1;
-		if (digit == 9) delta = -1;
-		// Wait 1000 ms
-		_delay_ms(1000);
-	}
-}
-</code>
-Kompileeritud näide {{:examples:hex:7_seg_naide.hex|HEX}}

et/examples/digi/7seg.1242658630.txt.gz · Last modified: 2020/07/20 09:00 (external edit)