IOT-OPEN.EU - The Yellow Book 2nd ed. - VREL NextGen Laboratory Guide
ToDo list for a yellow book, 2nd edition
Versions
-
-
-
- EMB5: Using LCD Display How do you use LCD (component 5)?
- EMB6: Using ePaper display How do you use the ePaper display (component 6)?
- EMB7: Using OLED display How do you use an OLED display (component 7)?
- EMB8: Controlling Smart LED stripe How do you use the Smart LED stripe (component 8)?
- EMB9A: Use of RGB LEDs How do you use RGB LED (component 9A)?
- EMB9B: Reading colour sensor How do you use light and colour intensity sensors (component 9B)?
- EMB10: Controlling standard servo How do you control a standard miniature servo (component 10)?
- EMB1A: Controlling a FAN with PWM How do you control a FAN (component 1A)?
- EMB1B: Reading environmental data with a Bosch integrated sensor How do you use pressure and environmental integrated sensor (component 1B)?
- EMB2: Using a digital potentiometer How do you use a digital potentiometer (component 2)?
- EMB3: Use of integrated temperature and humidity sensor How do you use temperature and humidity integrated sensors (component 3)?
- EMB4: 1-Wire Temperature Sensor How do you use a temperature-only sensor (component 4)?
- ADV1: Using timers to execute code asynchronously Using timers to handle the asynchronously periodic data display.
- IOT1: Reading MAC address of the WiFi Presenting MAC address of the WiFi interface
- IOT2: Reading IP address of the WiFi Connecting to the WiFi Access Point and presenting IP
- IOT3: Connecting to the MQTT and publishing data Connecting to the MQTT broker and publishing data
- IOT4: Connecting to the MQTT and subscribing to the messages Connecting to the MQTT broker and subscribing to the data
- IOT5: Setting up a CoAP service Publishing a CoAP service
- IOT6: Connecting to the CoAP service Connecting to the CoAP service
- IoT7: BLE Beacon Eddystone beacon example
- IoT8: BLE Communication with characteristics Simple BLE peripheral and central devices
- IoT9: BLE Communication with notify/indicate BLE communication with indication/notification
-
-
-
- STM_5: Using LCD Display How do you use LCD (component 5)?
- STM_6: Using ePaper display How do you use the ePaper display (component 6)?
- STM_7: Using OLED display How do you use an OLED display (component 7)?
- STM_8: Controlling Smart LED stripe How do you use the Smart LED stripe (component 8)?
- STM_9A: Use of RGB LEDs How do you use RGB LED (component 9A)?
- STM_9B: Reading colour sensor How do you use light and colour intensity sensors (component 9B)?
- STM_10: Controlling standard servo How do you control a standard miniature servo (component 10)?
- STM_1A: Use of fan How do you control a FAN (component 1A)?
- STM_1B: Reading environmental data with a Bosch integrated sensor How do you use pressure and environmental integrated sensor (component 1B)?
- STM_2: Using a digital potentiometer How do you use a digital potentiometer (component 2)?
- STM_3: Use of integrated temperature and humidity sensor How do you use temperature and humidity integrated sensors (component 3)?
- STM_4: 1-Wire Temperature Sensor How do you use a temperature-only sensor (component 4)?
- STM_IoT_AT: Programming of the WiFi interface with AT commands Programming of the WiFi interface with AT commands
- STM_IoT_1: Reading MAC address of the WiFi Presenting MAC address of the WiFi interface
- STM_IoT_2: Connecting to the WiFi Access Point and presenting IP Connecting to the WiFi Access Point and presenting IP
- STM_IoT_3: Connecting to the MQTT broker and publishing data Connecting to the MQTT broker and publishing data
- STM_IoT_4: Connecting to the MQTT broker and subscribing to the topic Connecting to the MQTT broker and subscribing to the data
- STM_IoT_5: BLE Beacon Setting-up BT Beacon
- STM_IoT_6: BLE Communication with characteristics Simple BLE peripheral and central devices
- STM_IoT_7: BLE Communication with indications BLE peripheral and central devices with indications
-
-
-
-
-
-