======Relee näidis======

Relee moodul peab olema ühendatud kontrolleri või anduri mooduliga. 

{{:en:iot:examples:relaypicture1.jpg?200|}}
{{:en:iot:examples:relaypicture2.jpg?200|}}


Releel on kolm sisend.

{{:en:iot:examples:relaypicture3.jpg?200|}}

Vajaminevad teegid:
<code>lib_deps = ITTIoT</code>

Näidiskood näitab kas midagi on ühendatud relee mooduliga või mitte:
<code c>
// Includes global variables and librarys that the relay shield uses
#include <Arduino.h>
#include <ittiot.h>

#define MODULE_TOPIC "ESP30/relay"
#define WIFI_NAME "name"
#define WIFI_PASSWORD "password"

#define RELAY_PIN 5 // The relay has been connected to pin 5

// If message received switch relay
void iot_received(String topic, String msg)
{
  Serial.print("MSG FROM USER callback, topic: ");
  Serial.print(topic);
  Serial.print(" payload: ");
  Serial.println(msg);

  if(topic == MODULE_TOPIC)
  {
    // If message received and it is 1, then switch relay on
    if(msg == "1")
    {
      digitalWrite(RELAY_PIN, HIGH);
    }
    // If message received and it is 0, then switch relay on
    if(msg == "0")
    {
      digitalWrite(RELAY_PIN, LOW);
    }
  }
}

// Function started after the connection to the server is established.
void iot_connected()
{
  Serial.println("MQTT connected callback");
  iot.subscribe(MODULE_TOPIC); // subscribe to topic relay
  iot.log("IoT relay example!");
}

void setup()
{
  Serial.begin(115200); // setting up serial connection parameter
  Serial.println("Booting");
  
  //iot.setConfig("wname", WIFI_NAME);
  //iot.setConfig("wpass", WIFI_PASSWORD);
  iot.printConfig(); // print json config to serial
  iot.setup(); // Initialize IoT library

  pinMode(RELAY_PIN, OUTPUT); // The relay pin is defined as output type
}

void loop()
{
  iot.handle(); // IoT behind the plan work, it should be periodically called
  delay(200); // Wait for 0.2 seconds
}

</code>