====== Wireless ======
<note>When connecting device with wireless connection (WIFI), you need to have a MQTT server.</note>

For connecting device with WIFI, download the [[https://home.roboticlab.eu/download/IoTConfiuration.apk|ITT IoTConfiuration application]].

  * **Power on IoT esp by USB cable**
  * **Connect your phone to IoT esp wireless network**

If IoT esp was configured before and connected to the server, then make sure when configuring again, 
that you need to leave the current WIFI range where the device was connected.

{{:en:iot:examples:setup:24271592_1760196944015083_291179072_o.jpg?300|}}


  * **Open IoTConfiuration application**
  * **Wait few seconds**

If device doesn't connect, make sure IoT-device WIFI is connected, or try closing and restarting the application.


__Not connected:__

{{:en:iot:examples:setup:24281648_1760201574014620_159275143_o.png?300|}}


__Connected:__

{{:en:iot:examples:setup:24208936_1760197054015072_537451988_o.png?300|}}


* **Connect to your network**

{{:en:iot:examples:setup:24197459_1760197140681730_1145219138_o.png?300|}}

* **Configure**

{{:en:iot:examples:setup:24259727_1760197227348388_762711517_o.png?300|}}

* **Add custom value if needed **

{{:en:iot:examples:setup:24271024_1760197250681719_2065720618_o.png?300|}}

{{:en:iot:examples:setup:24271350_1760197277348383_1964500720_o.png?300|}}

* **Press save and Restart esp**

{{:en:iot:examples:setup:24281605_1760197534015024_126221271_o.png?300|}}

* **Wait atleast 1 min for IoT esp connecting to the server**


**If IoT esp disables the configure mode WIFI then the device is successfully connected to the server. If not and the configure mode WIFI is still enabled, try:**
  - Make sure configure parameters where right (MQTT Server IP,MQTT login,Device name,etc)
  - Make sure no spaces are between parameters
  - Make sure device name is unique
  - Try without  adding a value
  - Leave the wifi area and try again