<code c>

#include <Arduino.h>
#include <ittiot.h>

#include <DHT.h>
#define DHTPIN D4     // what pin we're connected to
#define DHTTYPE DHT22   // DHT 22  (AM2302)

DHT dht(DHTPIN, DHTTYPE);

void iot_connected()
{
  Serial.println("MQTT connected callback");
  iot.log("IoT DHT example!");
}

void setup()
{
  Serial.begin(115200);
  Serial.println("Booting");
  iot.printConfig(); // print json config to serial //Peale Serial.begin ja enne iot.setup
  iot.setup();
  pinMode(16, OUTPUT);
  dht.begin();

}

void loop()
{
  iot.handle();

  float h = dht.readHumidity();
	float t = dht.readTemperature();

  char buf[10]; // Put whatever length you need here
	String(t).toCharArray(buf,10);

  digitalWrite(16,HIGH);
  iot.publishMsg("temp",buf);
	delay(2000);
  digitalWrite(16,LOW);

	String(h).toCharArray(buf,10);
  iot.publishMsg("hum",buf);
	delay(2000);
}


</code>