====== User-interface ======

[{{  :images:hardware:arm-can:modules:user-interface_enclosure.jpg?250|User-interface module}}]
/*
[{{  :images:hardware:arm-can:modules:user-interface.jpg?250|User-interface}}]

[{{  :images:hardware:arm-can:userinterface_pcb_1.jpg?250|User-interface front view}}]
[{{  :images:hardware:arm-can:userinterface_assembled.jpg?250|User-interface in enclosure}}]
[{{  :images:hardware:arm-can:userinterface_board_1.png?250|Rendered view}}]
*/

===== Features =====

**LCD**

  * Nokia 6610 LCD
  * 132 x 132 pixels
  * 4096 colors
  * 6 Mbit SPI interface
  * StellarisWare Graphics Library driver

**Inputs**

  * 2 axis sliding joystick
  * 2 push-buttons

**Speaker**

  * 0.5 W
  * 95 db at 10 cm
  * 800 Hz resonant frequency
  * Driven by PWM signal with digital amplifier

**Physical**

  * Dimensions 70 x 60 x 15 mm
  * Weight ~50 g
  * Optional housing

===== Connector =====

[{{  :images:hardware:arm-can:connectors:userinterface_connectors.png|User-interface connectors}}]

ARM-CAN User-interface connects only to the controller board with COMM connector. This one and only connector has all the pins necessary to use with on-board LCD, buttons, speaker and joystick. The correct way to look at the user-interface is shown in the illustration on the right.

~~CL~~

===== COMM =====

[{{:images:hardware:arm-can:connectors:userinterface_communication.png|COMM connector}}]

~~CL~~

Both the controller and user-interface COMM connectors are identical, except the names of the pins are different. Blue colored names represent microcontroller pin names to help use features.

~~CL~~

/*
===== Schematics =====

  * {{:datasheets:arm-can:userinterface.pdf|Schematics}}
*/