====== Programmer ======

[{{  :images:hardware:arm-can:modules:programmer_enclosure.jpg?250|Programmer module}}]
/*
[{{  :images:hardware:arm-can:modules:programmer.jpg?250|Programmer board}}]
*/

===== Features =====

**Programmer**

  * FTDI FT2232D USB-JTAG converter.
  * Compatible with Stellaris Flash programmer software.
  * Can download and debug program.

**Power supply**

  * Powered from USB bus.
  * Green power-on LED and red target-connected LED.

**Physical**

  * Dimensions 33 x 31 x 12 mm
  * Weight ~8 g
  * Optional housing

~~CL~~

===== Connectors =====

[{{  :images:hardware:arm-can:connectors:programmer_connectors.png|Programmer connectors}}]

ARM-CAN Programmer has two connectors: USB to connect the Programmer to PC and JTAG to connect the Programmer to ARM-CAN Controller. To recognize the connectors the programmer has to be held as shown in the picture. 

~~CL~~

==== JTAG ====

[{{:images:hardware:arm-can:connectors:programmer_jtag.png|JTAG connector}}]
~~CL~~

Programmer board has standard 20-pin JTAG connector with essential pins for programming and debugging. When voltage is detected on VREF pin, a red light on the Programmer board lights up.

==== USB ====

Programmer board has USB micro-AB connector to connect it with the PC.
/*
===== Schematics =====

  * {{:datasheets:arm-can:programmer.pdf|Schematics}}
*/